Netvox – R718N360-Wireless 3-Phase Current Meter Interface

Netvox – R718N360-Wireless 3-Phase Current Meter Interface

Description

R718N360-Wireless 3-Phase Current Meter Interface

 

The NETVOX wireless three-phase current interface which can detect the current can be connected with the different CTs by the user. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer.

• Apply SX1276 wireless communication module
• 2 ER14505 batteries AA size in parallel (3.6V / section)
• LoRaWAN™ Class A compatible
• 3-phase current raw data detection
• IP rating IP53
• The base is attached with a magnet that can be attached to a ferromagnetic material object
• Frequency Hopping Spread Spectrum (FHSS)
• Third-Party online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email (optional)
• Available third-party platform: Actility/ThingPark, TTN, MyDevices/Cayenne
• Improved power management for longer battery life

Parameters:

 

Electric:

Power Supply 2×3.6V ER14505 lithium batteries
Operating Voltage 3.1v to 3.65
Standby Current <25uA
Wakeup Current 7mA
Receiving Current (max) 11mA @3.3V
Transmitting Current (max) 120mA/3.3V
Battery Voltage Accuracy ±0.1V
Low Voltage Threshold 3.2V
Current Measurement Range It is recommended that the primary side current be at most 600A,and the secondary side current of the current transformer is at most 1A. If the accuracy of CT current transformer is 1%, the accuracy of R718N360 is 1.5%. (According to the current ratio configuration of the current transformer, as long as the secondary side current of the current transformer specification is at most 1A, the current transformer can be connected to R718N360 theoretically.)

Frequency:

Frequency Range

863MHz-928MHz 470MHz-510MHz

TX Power

US915 20dbm;
AS923 16dbm;
AU915 20dbm;
CN470 19.15dbm;
EU868 16dbm;
KR920 14dbm;
IN865 20dbm;

Receiving Sensitivity

-136dBm(LoRa,Spreading Factor=12,Bit Rate=293bps );
-121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)

Antenna Type

Built-in antenna

Communication Distance

Up to 10 km
(visible linear obstacle-free transmission distance , actual transmission distance depends on the environment )

Data Transfer Rate

LoRa: 0.3kbps~50kbps
FSK: 1.2kbps~300kbps

Modulation

LoRa/FSK (Note: You can choose one of them)

Supportable LoRaWAN Band

EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,
IN865-867,CN470-510

(Note: The frequency band is optional and needs to be configured before shipment)

Physical:

Dimension Host body:112mm*88.19mm*32mm
Operating Temperature Range -20°C ~ 55°C
Storage Temperature Range -40°C ~ 85°C
Operating Humidity Range <90%RH (No condensation)

Additional information

Netvox - R718N360-Wireless 3-Phase Current Meter Interface

Netvox – R718N360-Wireless 3-Phase Current Meter Interface

Reviews

There are no reviews yet.

Be the first to review “Netvox – R718N360-Wireless 3-Phase Current Meter Interface”

Your email address will not be published. Required fields are marked *

X