Netvox – R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT
Netvox R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT
Description
R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT
The NETVOX wireless three-phase current interface which can detect the current can be connected with the different CTs by the user. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer.
• Apply SX1276 wireless communication module
• 2 ER14505 batteries AA size in parallel (3.6V / section)
• LoRaWAN™ Class A compatible
• 3-phase current raw data detection
• IP rating IP53
• The base is attached with a magnet that can be attached to a ferromagnetic material object
• Frequency Hopping Spread Spectrum (FHSS)
• Third-Party online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email (optional)
• Available third-party platform: Actility/ThingPark, TTN, MyDevices/Cayenne
• Improved power management for longer battery life
Parameters:
Electric:
| Power Supply | 2×3.6V ER14505 lithium batteries |
| Operating Voltage | 3.1v to 3.65 |
| Standby Current | <25uA |
| Wakeup Current | 7mA |
| Receiving Current (max) | 11mA @3.3V |
| Transmitting Current (max) | 120mA/3.3V |
| Battery Voltage Accuracy | ±0.1V |
| Low Voltage Threshold | 3.2V |
| Current Measurement Range | It is recommended that the primary side current be at most 600A, and the secondary side current of the current transformer is at most 1A. If the accuracy of CT current transformer is 1%, the accuracy of R718N360 is 1.5%. (According to the current ratio configuration of the current transformer, as long as the secondary side current of the current transformer specification is at most 1A, the current transformer can be connected to R718N360 theoretically.) |
Frequency:
|
Frequency Range |
863MHz-928MHz 470MHz-510MHz |
|
TX Power |
US915 20dbm； |
|
Receiving Sensitivity |
-136dBm（LoRa，Spreading Factor=12，Bit Rate=293bps )； |
|
Antenna Type |
Built-in antenna |
|
Communication Distance |
Up to 10 km |
|
Data Transfer Rate |
LoRa: 0.3kbps～50kbps |
|
Modulation |
LoRa/FSK (Note: You can choose one of them) |
|
Supportable LoRaWAN Band |
EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3, (Note: The frequency band is optional and needs to be configured before shipment) |
Physical:
| Dimension | Host body:112mm*88.19mm*32mm |
| Operating Temperature Range | -20°C ~ 55°C |
| Storage Temperature Range | -40°C ~ 85°C |
| Operating Humidity Range | <90%RH (No condensation) |
Additional information
| R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT | R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT |
|---|
Reviews
There are no reviews yet.