Contec M2M Gateway (CPS-MG341-ADSC1-931)
Contec M2M Gateway (CPS-MG341-ADSC1-931)
Description
Contec M2M Gateway (CPS-MG341-ADSC1-931)
This product is a M2M controller with isolated RS-422A/485, isolated digital input/output, isolated counter input, inter-channel isolated analog input, RS-232C, LAN interface, and Ethernet Hub. It is equipped with the ARM®Cortex®-A8 processor (600MHz) and the 512MB DDR3-SDRAM system memory. On-board NOR-FLASH is utilized for a booting device. CPS-MG341-ADSC1-931 contain OPC UA server function within.
The product can communicate directly with HMI and SCADA software that support OPC UA clients from various makers. CPS-MG341-ADSC1-931 is the data collector [M2M Gateway for PLC] controller that supports respective PLCs as well as various Modbus devices. In the facilities with PLC controlling, data can be collected by M2M Gateway for PLC controller, and the facilities without PLC controlling, data can be collected by M2M controller.
”M2M Gateway for PLC” can connect up to 10 Ethernet/calculating links with differing makers’ PLCs simultaneously.
With the CONPROSYS series, data can be collected from various types of facilities and managed them all centrally.
All the processes from development to operation can be performed on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud System at low cost and in a short time.
Hardware Features
The product contains I/O interface such as digital I/O, analog input, counter, and serial communication
RS-232C: 1-channel, RS-422A/485: 1-channel, Photocoupler isolation input (compatible with current sink output): 4-channel, Semiconductor relay output: 2-channel, Bus isolation analog input (current input): 2- channel. Counter input performs up-counting: equipped with two channels of up counters. * Two of four digital-input can be used as the counter-input.
Compact Design
Compact design, 188.0(W) × 78.0(D) × 30.5(H), features flexibility in installation.
Adaptable to a temperature range between -20 and +60°C
The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
Ethernet Hub Function within
Use the product as Ethernet Hub so that you can connect devices in the daisy-chain.
A powerful running platform without fan
The product contains the ARM® Cortex®-A8 processor (600MHz) and the DDR3 512MB system memory.
Decrease malfunctions or damages by bus isolation and surge protection. (the RS-422A/485, digital/counter input)
Electrical isolation between the RS-422A/485 and the CPU, as well as between the digital/counter input and CPU can block up the electrical noise flow. Moreover, the surge protection elements are used for signal line and on top of that, the RS-422A/485 is protected with the communication IC that can withstand ±70 V input voltage, which reduces malfunctions or damages by surge.
Decrease malfunctions or damages by bus isolation, inter-channel isolation and surge protection. (Analog input)
As analog inputs and channel, along with analog inputs and CPU, are electrically isolated, connecting an input signal with electric potential difference is possible. In addition, the surge protection elements are used for signal lines, which reduces malfunctions or damages by surge.
Capable of adapting a wide-range power (12- 24VDC)
The product is capable of dealing with a wide range of power in the differing environments. Power connector also has a FG terminal.
Installation easy with two pieces of terminal support and DIN rail
You can install and remove a terminal connector without a screwdriver so that it can shorten the time of the replacement. As the product can be mounted on the DIN rail, removing and replacing are easy as well.
Equipped with LED for an operation check
The product has LED for an operation check, which helps you visually confirm the communication status of each interface.
Choice of a battery with a longer life
With a choice of a long-life battery, the Contec is creating longer lasting products.
Software Features
Together with OPC UA Server
OPC UA (Unified Architecture) is an advanced model of OPC specifications, which presents refined capability of transmitting and receiving semantic description data. OPC UA is a platform independent standard based on TCP. This product can be operated with HMI and SCADA software that support OPC UA clients from various makers.
Promoting a multi-vendor system supporting a varied lineup of PLCs and Modbus devices
The product connects and supports every PLC and each Modbus device simultaneously. *Visit our website regarding the details of supportive information.
Connect up to 10 links and collect data from 100 group registers
Up to 10 Ethernet/calculating links can be connected. Data collection from 30 PLCs and 100 group registers can be carried out. Up to 1000 data mapping for Modbus is possible.
Measurement and Upload
CPS-MG341-ADSC1-931uploads measured data of the sensor and collected data from PLC to the Cloud server.
Web Monitoring
The product contains a Web server (Java applet). Even with the PC located remotely, I/O information can be monitored and updated through a Web browser. On the monitoring screen, the standard GUI parts (graphic, slider, button, etc.) can be freely arranged.
All operations including monitoring layout, making relations with I/O information, can be achieved through a Web browser.
Web Task Script
By combining icons such as arithmetic operations, conditional branching, data outputting, you can set up the executions or its processes like drawing them in the flowchart. All operations can be completed on the Web browser.
Support a communication protocol MTConnect for machine tools
MTConnect is a communication protocol for machine tools and standardized by MTConnect Institution. CONPROSYS has MTConnect Adapter and Agent built-in and can be operated with client software that supports MTConnect.
Additional information
| Contec M2M Gateway | Contec M2M Gateway (CPS-MG341-ADSC1-931) |
|---|
Reviews
There are no reviews yet.